Again like the 8ft wide tunnel this is the ideal hobby or garden polytunnel to fit into that small corner of your garden, standing at 7ft high and fabricated from 32mm galvanised steel makes it a very robust structure, all fittings are galvanised or zinc plated the timber is pressure treated so should be good for 10yrs. The image above shows a timber hinged door which we do not supply anymore (please see the 8ft wide page for image of the sliding door), again the timber is treated and slides on an aluminium door rail. The door also comes with netting and polythene so you have the choice of covering. (doors also available in aluminium)
You will also see on the left of the polytunnel a timber side rail and netting (about 1m from the ground) and a roll up curtain which allows you to open and close the sides for ventilation. (this is normally on both sides but can be used on just one.) Again all timber is treated for long life. (also available in aluminium)
The timber base rail seen at ground level goes all the way around the base of the tunnel and is used to fix the cover to. Using this method you must concrete the ground tubes into the ground every 5ft -6ft depending on the size of polytunnel and fit the base rail to them. In my mind this is a better way to fix the polythene giving you a neater and stronger structure and does away with a lot of digging if you are using the trenching system. Also makes life easier when replacing the cover. If you are not able to concrete in the ground tubes we have what we call Anchor plates which means you do not need concrete. (base rail also available in aluminium)
Crop bars are another optional extra, they fit across the hoops and will give you approximatly 20% extra strength both snow and wind load, also handy for hanging baskets or to tie plants to.
All our 10ft wide garden Polytunnels are available at 5ft or 6ft spacing's,
and are fabricated from 32mm galvanised tube for extra strength.
Prices are for the basic kit consisting of.
* Ground Tubes * Framework * Fittings * Timber end frames *
* Anti hot spot tape * Choice of Covering.* Instructions
Everything you need for the trenching system
|
Prices below are for the basic kit and include VAT @ 20%
You can buy over the phone or visit our ''buy it now page''. |